Six guides to QR codes that keep working
Each one answers a question that comes up when a code has to survive printing, scanning and a year on a wall — written from the format specification and from testing real phones, not from a list of features.
Static vs dynamic QR codes
What a static code encodes, what a redirect adds, and why an expired redirect plan is worse than a fixed URL.
Read the guide →WiFi codes for guests
The five characters that must be escaped, WPA3 in a format that predates it, hidden SSIDs and captive portals.
Read the guide →Capacity and error correction
A measured byte-capacity table from version 1 to 40 at levels L, M, Q and H, and how to choose between them.
Read the guide →Print size and quiet zone
Working back from scan distance to symbol width and module size, plus the four-module margin scanners need.
Read the guide →vCard codes on iOS
Why a contact code shows a sheet on one iPhone and raw text on another, and how to keep duplicates out of the address book.
Read the guide →Why codes stop working
Five failure modes in triage order — destination, geometry, contrast, payload and physical damage.
Read the guide →Where to start
Depends on what you are about to print.
Making a WiFi card for a café or a guest room? Read the guest WiFi guide first. Most failures there are a single unescaped semicolon, and the fix takes a minute.
Designing packaging or a poster? Start with print size and quiet zone, then check the payload fits with the capacity table. Size and contrast decide whether the print works; everything else is secondary.
Printing business cards or badges? The vCard guide covers the field order, the CRLF requirement and the duplicate-contact problem.
Inheriting codes someone else printed? The failure checklist tells you what to test before you spend money on a reprint.
Choosing between a free static code and a paid redirect service? Static versus dynamic lays out what each one costs you over the life of the print run.