Temperature converter that uses formulas, not multipliers
Seven scales, each with its own formula. Temperature is the one category where multiplying by a factor gives a wrong answer every time the zero point is not shared.
1 unit in every unit
| Unit | Symbol | Value |
|---|
Other categories: Length · Weight · Area · Volume · Speed · Data · Time
Why a single factor cannot work
Celsius and Fahrenheit agree on the size of a degree step only approximately, and they disagree completely about where zero is. Fahrenheit puts zero at the coldest brine mixture he could produce in 1724; Celsius puts zero at the freezing point of water. That makes the relationship affine, not proportional: °F = °C × 9/5 + 32. A converter that multiplies by 1.8 and stops will be wrong by 32 degrees across the whole range.
This tool converts every scale to Celsius first, then out to the target scale using that scale's own inverse formula. The result is exact where the definitions are exact: 0 °C is 32 °F with no rounding at all, and −40 °C is −40 °F because that is the one temperature where the two scales cross.
| Unit | Definition | Note |
|---|---|---|
| degree Celsius °C | °C = °F × 5/9 after subtracting 32; the reference scale here | |
| degree Fahrenheit °F | °F = °C × 9/5 + 32 | |
| kelvin K | K = °C + 273.15 | absolute scale, 0 K = −273.15 °C |
| degree Rankine °R | °R = °C × 9/5 + 491.67 | absolute scale used in US engineering |
| degree Réaumur °Ré | °Ré = °C × 4/5 | historical scale: 80 °Ré = 100 °C |
| degree Newton °N | °N = °C × 33/100 | historical scale: 33 °N = 100 °C, water freezes at 0 °N |
| degree Delisle °De | °De = (100 − °C) × 3/2 | historical scale that runs backwards: 150 °De = 0 °C |
Conversions worth checking against a thermometer
Body temperature, oven settings and weather forecasts are the three places where people convert temperatures most often, and where a wrong scale produces a visibly wrong number rather than a subtle one.
| Conversion | Result (6 digits) | At 10 digits |
|---|---|---|
| 0 degrees Celsius → degrees Fahrenheit | 32 °F | |
| 100 degrees Fahrenheit → degrees Celsius | 37.7778 °C | 37.77777778 |
| 37 degrees Celsius → degrees Fahrenheit | 98.6 °F | |
| 300 kelvin → degrees Celsius | 26.85 °C | |
| -40 degrees Celsius → kelvin | 233.15 K | |
| -40 degrees Fahrenheit → degrees Celsius | -40 °C | |
| 100 degrees Celsius → degrees Rankine | 671.67 °R | |
| 671.67 degrees Rankine → kelvin | 373.15 K |
Absolute scales: kelvin and Rankine
Kelvin and Rankine both start at absolute zero, which makes them ratio scales: 400 K really is twice as much thermal energy as 200 K. Celsius and Fahrenheit are interval scales, so saying 40 °C is twice as hot as 20 °C is meaningless. Kelvin uses the Celsius degree size, Rankine uses the Fahrenheit degree size, and the two absolute scales differ by the same 9/5 factor as their relative counterparts. A US engineering document that specifies 500 °R means 277.6 K, or 4.4 °C.
The three historical scales
Réaumur (1730) put 80 degrees between freezing and boiling water, which made it convenient for the alcohol thermometers of the period. Newton's 1701 scale used 33 steps over the same range, with 0 at freezing water. Delisle's scale runs backwards: zero is boiling water and 150 is freezing water, because he calibrated his thermometer from the boiling point downwards. All three are obsolete for daily use, but they still appear in historical texts, old recipes and instrument catalogues, and they are included here so an old document can be read without guesswork.
The mistakes that matter
- Converting a difference as if it were a reading. A 10 °C rise is an 18 °F rise, not a 50 °F rise. Differences only use the ratio (9/5), never the offset. Add 273.15 only for absolute values in kelvin.
- Doubling a Celsius reading. 20 °C doubled is not 40 °C in any physical sense, and it is not a valid Fahrenheit conversion either. Use the formula.
- Assuming the tool handles offsets for intervals. This converter treats every input as an absolute reading on the chosen scale, which is what a thermometer shows. For temperature differences, convert both readings and subtract.
- Trusting kitchen oven dials. A dial marked 180 °C typically oscillates by 10 to 15 °C. Converting it to 356 °F to the sixth digit implies a precision the appliance does not have.
Frequently asked questions
Is 0 °C exactly 32 °F?
Yes. The offset in the conversion formula is exactly 32, so 0 °C converts to 32 °F with no rounding. The two scales were aligned on the freezing and boiling points of water by international agreement, and the definition of the Fahrenheit degree is 5/9 of a kelvin.
Why does −40 appear on both scales?
It is the fixed point of the equation F = 1.8C + 32. Setting F = C gives C = 1.8C + 32, so −0.8C = 32 and C = −40. Below that temperature the Fahrenheit number is larger than the Celsius number, above it the Celsius number is larger.
How do I convert a temperature change rather than a temperature?
Multiply a Celsius or kelvin difference by 1.8 to get a Fahrenheit or Rankine difference, and reverse that for the other direction. Never add 32 or 273.15 to a difference — offsets apply only to absolute readings.
Related guides
- Temperature conversion is a formula, not a multiplier — the four formulas, the two traps, and why ratios only work on absolute scales
Written by the https://example.com team. Last updated November 19, 2026.